Tutorial Icon
QF-Test Tutorial version vidéo

Tutoriel en version vidéo: Nous vous guidons pas à pas à travers QF-Test...

Data driven Testing: Running one 'Test case' with different test data

This chapter explains how data driven testing can be achieved using QF-Test.

You can find the implementation of the following examples in the demo test suite qftest-7.1.2/doc/tutorial/advanced-demos/en/datadrivenTesting.qft.

The second provided test suite qftest-7.1.2/doc/tutorial/datadriver.qft contains further samples like reading an Excel file or creating an iteration over test cases.

Please take care to copy all test suites to a project-related folder first and modify them there.

Situation

The users of the CarConfigurator can grant several discount levels to their customers. Thus the test designers have figured out three discount levels which have to be tested.

Those discount levels are 0%, 10% and 15%.

As the workflow of granting discounts is the same for each discount level, we can use the same test case for testing them. The only difference between the test cases is the input of the actual discount level and the price to check. A major advantage of using the same test case is that this avoids side effects caused by several implementations of a 'Test case', which could have different bugs. Additionally we can reduce the implementation effort.

The logical test case, i.e. the steps of the test, for granting a discount will look like this:

  1. Start the SUT.
  2. Select a vehicle.
  3. Specify the discount.
  4. Check whether the discount has been used for price calculation.
  5. Stop the SUT.

The following paragraphs demonstrate how to implement such a scenario.

Traditional way of implementing data driven testing

The QF-Test definition of a 'Test case' node says that a 'Test case' is a workflow together with a specific set of test data. If you have two sets of test data, you have to use two different 'Test case' nodes. Those nodes can be organized within a 'Test set' node.

So the conventional way to solve the issue is to implement one 'Test case' per discount level, like depicted below:

Figure 28.1:  Traditional way of data driven testing

Those three nodes are grouped within a 'Test set' node. The 'Test set' node also contains the 'Setup' and the 'Cleanup' sequences, which will launch the SUT before each 'Test case' and will stop the SUT after it. This is to ensure that each test case has the same pre-conditions. If you do not want to re-start the SUT between the single test runs, you could add a new 'Test set' to the 'Test set' 'Discount levels' and move the three 'Test case' nodes into that 'Test set' like this:

Figure 28.2:  Traditional way with a nested 'Test set'

The chapter Dependencies: Automatically ensuring correct prerequisites for each 'Test case' will show up a more elegant and more efficient way of organizing pre-requisites of test cases.

As you can imagine this approach could be very exhausting with regards to maintaining test data, especially if we have to add or remove discount levels. Another disadvantage is that we keep the test data within QF-Test.

The next section Data driver concept demonstrates how to organize the test suite to implement the 'Test case' only once and to keep the test data separated from the test case.

Data driver concept

If we want to run one test case using different test data sets, we have to define the test data in a data source first. The data source has to be part of a 'Data driver' node. QF-Test offers built-in data source nodes for database tables, CSV files, Excel files and QF-Test data tables. A QF-Test data table will store the data in the test suite itself. This is what we will use for the following example. You can use any other type of data sources, e.g. XML files, too, by implementing your own script for reading the data.

Insert a 'Test set' to the test suite first. You can choose whatever name you want.

A 'Data driver' node can be inserted into a 'Test set' via right mouse click and then selecting »Insert node«-»Data drivers«-»Data driver«. You have just to specify a name for this node. The actual data source will then be inserted as child node to that 'Data driver' node. For our example we insert a 'Data table' via a right mouse click at the opened 'Data driver' node and select »Insert node«-»Data drivers«-»Data table«. Now we should detect this dialog:

Figure 28.3:  Data table dialog

First we have to specify a name for this data source. We should also define a name for the 'Iteration counter' variable. The iteration counter contains the index of the currently executed test data in the test run

The next step is to define the test data. Therefore click on the 'Insert column' button, which is the first button of the 'Data bindings' section. Then you have to define a name for the column, let us set it to 'discount'. After pressing 'OK' you will see that the column has been inserted in the 'Data bindings' area. This column heading will stand for the variable name in the tests later.

Now you can use the 'Insert row' button to insert a new row. Each row will stand for one test data set, i.e. you have to insert three rows by now, where the first row contains '0', the second '10' and the third '15'.

The table should look like this:

Figure 28.4:  The filled data table

The next part is the implementation of the test case. Therefore we just insert one 'Test case' node to the 'Test set'.

Note If you want to insert a 'Test case' to a 'Test set' which already contains a 'Data driver' node, you have to select the closed 'Data driver' node to insert it.

The 'Test case' will contain the procedure calls for the required test steps. The 'Setup' and 'Cleanup' nodes of the previous example can also be copied to the 'Test set'. The whole 'Test set' will look like this now:

Figure 28.5:  'Test set' with 'Data driver'

The following step is to make use of the variable 'discount' which has been defined at the 'Data table' node before. We will add that variable as parameter to the 'setDiscount' procedure call. Once we have done this, we have following result:

Figure 28.6:  Using the $(discount) parameter

Now we are ready to launch the 'Test set'.

After running the tests we should get at least two errors. Those errors come from the different values of the 'Final price' text-field, but our test always verifies the same value. In our case we should also put the expected values for the 'Final price' fields to our test data via adding a second column to the 'Data table' node.

Figure 28.7:  Full data table

Another drawback is, that we see the same test case name in the HTML overview report and in the run logs for each test run. To avoid this we can edit the 'Name for reports and run logs' attribute of the 'Test case' node. In that attribute we have to make use of at least one of the test case specific data, i.e. in our case 'discount'. So let us set that attribute to 'Discount $(discount)'.

Figure 28.8:  Name for run log and report attribute

If we rerun the tests now, we should get no error anymore and the run log as well as the HTML report contain three different test case names. Here you can see the created run log file:

Figure 28.9:  Run log with different names per 'Test case'

If you want to run one 'Test case' only without the whole 'Test set' and its 'Data driver', it is recommended to set default values for the variables as global ones at 'Test suite'.

Note If the name of the variable in the 'Data driver' is the same like the name of the procedure, you can also skip the variable definition of the 'Procedure call'. This can be done because the variable of the 'Data driver' will be put at QF-Test's variable stack and so any step within the 'Test case' can access that variable. You can see this behavior in the demo test suite qftest-7.1.2/doc/tutorial/advanced-demos/en/datadrivenTesting.qft in the 'Test set' "data driven tests with optimized procedure calls".

In the demo test suite qftest-7.1.2/doc/tutorial/advanced-demos/en/datadrivenTesting.qft you can also find an additional 'Test set' using a CSV file as data source.

Summary

The 'Data driver' concept of QF-Test allows the user to create logical test cases and to keep the test data separated from the test flow itself.

It is even possible to use nested 'Data driver' nodes in a 'Test case'. This can be achieved by creating a 'Test step' in a 'Test case'. This 'Test step' can contain the nested 'Data driver'.

You can find a more detailed explanation about data driven testing within QF-Test in the manual in the chapter Data-driven testing.

The second provided test suite qftest-7.1.2/doc/tutorial/datadriver.qft contains further samples like reading an Excel file or creating an iteration over test cases.